Course Search Results

  • DMT 1005: Basic Shop and Safety Skills

    2.00 Credits
    Utah Valley University

    Covers the selection and usage of basic occupational hand tools. Presents fastener types and applications. Provides practice on proper drill and tap skills. Includes experience learning correct measuring skills. Addresses manufacturers electronic service literature and search engines. Classifies and employs shop measuring tools with their specific functions. Covers recognition of fundamental heavy truck/equipment engine, power-train and chassis components. Emphasizes shop safety guidelines and proper handling of hazardous materials. Requires safety certification. Tool room fee of $55 applies. Software fee of $33 applies.
    ShareDMT 1005 - Basic Shop and Safety Skills

  • DMT 1110: Diesel Engine Overhaul

    4.00 Credits
    Utah Valley University

    Corequisite(s): DMT 1110L. Pre- or Corequisite(s): DMT 1005. Introduces diesel engine operating principles, factors affecting performance, design variations, and identification of components. Focuses on disassembly and reassembly of diesel engines following industry standard overhaul procedures. Includes the identification, inspection, and measuring of parts to determine condition for reuse. Uses failed components to assist in teaching troubleshooting skills. Provides theory of engine tune-up processes on various engines used by industry. Software fee of $33 applies. Lab access fee of $45 for computers applies. Corequisite:    DMT 1110L
    ShareDMT 1110 - Diesel Engine Overhaul

  • DMT 1110L: Diesel Engine Overhaul Lab

    2.00 Credits
    Utah Valley University

    Corequisite(s): DMT 1110. Pre- or Corequisite(s): DMT 1005. Provides hands on experience in diesel engine operating principles, factors affecting performance, design variations, and identification of components. Includes disassembly and reassembly of diesel engines following industry standard overhaul procedures. Focuses the identification, inspection, and measuring of parts to determine condition for reuse. Utilizes failed components to assist in teaching troubleshooting skills. Tool room fee of $55 for equipment applies. Course Lab fee of $22 for materials applies. Software fee of $33 applies. Corequisite:    DMT 1110
    ShareDMT 1110L - Diesel Engine Overhaul Lab

  • DMT 1120: Diesel Engine Operation Tune Up

    4.00 Credits
    Utah Valley University

    Pre- or Corequisite(s): DMT 1110, DMT 1110L, DMT 1120L. Covers diesel engine components, controls, operating systems, and performance factors. Addresses engine component replacement, tune-up adjustments, and the requirements for engine dynamo-meter testing. Emphasizes basic engine operating factors and troubleshooting complaints such as: low power, smoke conditions, and engine faults. Software fee of $33 applies. Lab access fee of $45 for computers applies.
    ShareDMT 1120 - Diesel Engine Operation Tune Up

  • DMT 1120L: Diesel Engine Operation Tune up Lab

    2.00 Credits
    Utah Valley University

    Corequisite(s): DMT 1120. Examines diesel engine components, operating systems, and performance factors. Provides opportunity to perform hands on component replacement and tune-up adjustments. Provides the opportunity to run an engine under load in a dynamometer test cell. Troubleshoots common engine operating complaints, such as low power, smoke conditions, engine faults, etc. Tool room fee of $55 for equipment applies. Course Lab fee of $27 for materials applies. Software fee of $33 applies. Corequisite:    DMT 1120
    ShareDMT 1120L - Diesel Engine Operation Tune up Lab

  • DMT 1510: Electrical Systems I

    4.00 Credits
    Utah Valley University

    Prerequisite(s): AUT 1260 (or any MAT or MATH course 1000 or higher) with a C- or better. Corequisite(s): DMT 1510L. Teaches the definition of electricity: voltage, current, and resistance as well as the electrical rules of Ohm's law, Watt's law, Kirchhoff's circuit laws. Provides examples of the application of the above laws in both series and parallel circuits. Includes instruction on the proper use of DVOM's and their function in diagnosing and troubleshooting electrical circuitry on heavy trucks and equipment. Teaches electrical components and symbols. Teaches correct repair procedures for wiring, fuses, and connectors. Addresses starting and charging system operation and testing. Emphasizes all safety procedures practices. Software fee of $33 applies. Lab access fee of $45 for computers applies. Corequisite:    DMT 1510L
    ShareDMT 1510 - Electrical Systems I

  • DMT 1510L: Electrical Systems I Lab

    2.00 Credits
    Utah Valley University

    Prerequisite(s): AUT 1260 (or any MAT or MATH course 1000 or higher) with a C- or better. Corequisite(s): DMT 1510. Provides hands-on experience using a DVOM on series and parallel circuits. Identifies electrical components and examines their functions. Describes testing batteries, starting systems, and charging systems. Identifies the correct repairs on these systems and when applicable. Provides practice in electrical safety and preventative maintenance. Covers basic electrical repair techniques. Tool room fee of $55 for equipment applies. Course Lab fee of $30 for materials applies. Software fee of $33 applies. Corequisite:    DMT 1510
    ShareDMT 1510L - Electrical Systems I Lab

  • DMT 1520: Electrical Systems II

    2.00 Credits
    Utah Valley University

    Corequisite(s): DMT 1520L. Pre- or Corequisite(s): DMT 1510 and DMT 1510L. Covers heavy and medium duty vehicle electrical systems including lighting, climate control, computer controls and accessories. Emphasizes DOT lighting regulations for vehicles and trailers. Introduces fundamentals of electrical circuitry and schematics. Examines the computer controls on modern vehicle electrical systems. Software fee of $33 applies. Lab access fee of $45 for computers applies. Corequisite:    DMT 1520L
    ShareDMT 1520 - Electrical Systems II

  • DMT 1520L: Electrical Systems Lab II

    1.00 Credits
    Utah Valley University

    Corequisite(s): DMT 1520. Pre- or Corequisite(s): DMT 1510 and DMT 1510L. Focuses on lab work for the troubleshooting and repair of heavy/medium duty electrical systems and electronic engine management. Includes vehicle and trailer lighting, monitoring, and control systems. Emphasizes DOT safety regulations requirements. Tool room fee of $55 for equipment applies. Course Lab fee of $25 for materials applies. Software fee of $33 applies. Corequisite:    DMT 1520
    ShareDMT 1520L - Electrical Systems Lab II

  • DMT 2230: Heating Ventilation Air Conditioning and Refrigeration Theory

    2.00 Credits
    Utah Valley University

    Corequisite(s): DMT 2230L. Pre- or Corequisite(s): DMT 1510 and DMT 1510L. Teaches the principles of heat transfer using refrigerant as the medium. Emphasizes the identification and operation of individual system components. Discusses the different types of refrigerants used in the mobile industry as well as recovery, recycling, storage, handling, and disposal. Also covers the theory and operation of auxiliary power units used on highway trucks. Software fee of $33 applies. Course fee of $10 for materials applies. Lab access fee of $45 for computers applies. Corequisite:    DMT 2230L
    ShareDMT 2230 - Heating Ventilation Air Conditioning and Refrigeration Theory